Please remember that the
information below is copyright protected as is all information
on websites
Mineral Powder Makeup Foundation
Application Tips
**Please note
that RAESIN IMAGES - Colour ID Minerals Makeup mineral foundations,
concealers, and setting powders are the perfect amount of pigment
for a flawless coverage.
Colour ID Minerals
foundations are 4 in 1 complete coverage, but we do offer mineral
concealers, mineral setting powders, as well as our award winning
primer/setting Resurface X-treme powder for those whose skin
needs a little extra help or for those that use our liquid and
cream foundations needing a finishing powder.
How To Apply Colour ID Minerals Makeup Foundation
Face Powders
Carefully remove
container lid, then sifter. Replace lid on container,
shake container upside down lightly tapping to loosen product.
Upright container and again carefully remove lid. If you
replace the sifter, please be careful so as not to force powder
out the edges of the sifter. Most women find they are
not able to replace the sifter on the container due to the high
amount of product inside the container once they’ve loosened
it. It is nice to own a vanity jar to tap out a small
amount of powder/product to use with the application method
you choose.
Sifter jars are sold on our site for your needs, as well
as our mineral makeup
vanity jars.
Perfect for putting your mineral makeup foundation powders in.
No mess, perfect for mixing.
Take your time
when working with minerals. You will soon find an application
method that works great for you. You’ll appreciate the
evenness of the color, and concentration that the powder allows
for light or heavy coverage.
Apply Mineral
Makeup Foundation Dry Method #1
1.
(Sifter
insert in container) With lid on, softly tap or shake
product upside down into lid, if you don’t have one of my sweet,
vanity foundation
mixing jars, this is a fast, easy method to use.
2.
Right container. This allows just the right
amount of powder to enter the container between the sifter and
lid. Some women like to tap the powder into the lid; some
prefer to leave it in sifter area.
3.
Using flat part your foundation brush or chiseled
powder brush, gently tap applicator into powder. (Tap
off excess, or you will be wasting product and possibly end
up with poor application.)
4.
Lightly tap powder onto areas of face where you
need heavier coverage first. Tap powder on the remainder
of your skin where needed. (I don’t suggest covering your
entire face with foundation; most women don’t need it, though
most prefer a full face of foundation, to spot coverage.
Use your best judgment. Foundation should MATCH your skin
exactly, if it does not, then it is the wrong color tone, and
you will need to find the proper shade.
Gently Tapping
is the secret to any of the dry methods of application
5.
Once you have lightly tapped powder on desired
areas, use a large powder brush blending all powder by swishing
and swirling brush over your skin. I like to use light,
short, quick whisking motions. Especially take notice
of areas around your hairline, chin, and edge of face.
With Colour ID Minerals powders your foundation should match
your skin and you should not have any telltale lines as with
other brands of foundations.
RAESIN IMAGES
Colour Identification True Tone System Foundation Mineral Makeup
Brand products are all highly pigmented. The powder is
very condensed a little goes a long way when applied properly
using the above and below methods.
PREFERRED MINERAL MAKEUP APPLICATION Method Dry
#2
1. Using
the same method as directed above, substitute, flocked sponge,
sponge wedge, powder puff. Some women like to use large
kabuki and or fan brushes for application.
We like to remind
women that our products are not like Id bare escentuals or bareminerals.
RAESIN IMAGES Natural Cosmetics Colour ID Minerals Brand Makeup
face powder foundations don’t need excessive buffing to apply.
Not only is all this buffing unnecessary it can be damaging
to your skin if you are using harsh brushes, as each time a
harsh bristle (and there can be hundreds of them) touches your
delicate skin, it can cause small abrasions for bacteria to
enter underlying skin layers causing sensitivity, itching, acne,
and skin infection. Please do not use harsh or synthetic
brushes when applying your cosmetics except where indicated
necessary as in taklon eyeliner brushes.
Apply Mineral Makeup Foundation
Wet Method #1
1.
Lightly spritz face with purified water or hydrosols
after you’ve tapped excess product from brush before you apply
product to skin.
2.
If you find your product is drying out before
you feel you are finished, then lightly spritz again.
3.
You can substitute a foundation brush, sponge,
or powder brush for your wet application also.
Hydrosols are
sold in my skin care section and are nice to carry with you
for quick touch ups if needed, as well as their contributing
to quenching and nourishing skin with antioxidants.
Apply Mineral Makeup Foundation
Wet Method #2
1.
Try mixing a few drops of your favorite moisturizer
in with your powder, this way you have a light lotion, perfect
for on the go days when you feel all you need is a tinted moisturizer.
Apply Mineral Makeup Foundation
Wet Method #3
1.
Try method #2, substituting water for your moisturizer.
Always clean
your foundation application tools DAILY with a gentle (Ivory
or Dove) liquid or cake soap and water. Do not use antibacterial
soap if you want your brushes to last, this dries out the natural
oils in the natural hair brushes.
Apply Mineral Makeup Foundation
Professional Tips:
Using Your Mineral Makeup Kabuki
Brush
-
Dip your mineral makeup or other
kabuki brush in powder, loose or pressed, of your choice,
tap off excess.
-
Blend mineral foundation, or
bronzing makeup powder over entire face and body (applicable
for concealing spider veins, etc.) to create a smooth even
flawless finish.
For More Information On How To Apply Mineral
Makeup Visit Mineral Makeup Reviews and News Blog Site
